Showing posts with label DIY projects. Show all posts
Showing posts with label DIY projects. Show all posts

Tuesday, February 9, 2016

DIY Projects - Dog Kennel Greenhouse Part I: Introduction and the ridge rail

As a gardener, a greenhouse is one of the most useful pieces of equipment you can have. When we think of greenhouses, we may think only of the big greenhouses that commercial nurseries have, and those are nice, but you can build a greenhouse out of almost anything. Basically, a greenhouse is a frame covered with the appropriate material. While I'll be building a couple of hoop greenhouses this year, those aren't the only kinds of greenhouse there are.

My first greenhouse, The Cube.

The first greenhouse I ever built, and one that I still use, I called The Cube. It was a square steel frame that my father had built for a winery to handle wine barrels.  When the winery no longer needed it, dad gave it to me. I covered it with greenhouse film, put a white tarp on top, and voila! I had a greenhouse. It served me well for years. It's small as far as greenhouses go, being only around 90 square feet, but one year I produced almost 400,000 plugs and containers of produce from it. It was the heart and engine of my small farm and small greenhouses continue to be the heart and engine of my garden.

The Cube currently sits idle while I refurbish it, so I needed to set up another small greenhouse. I have a dog kennel that I used to house poultry last year. It's close to the house, and gets sun most of the day, even in the dead of winter. It's partially under an old apple tree, but the tree doesn't interfere with the sun during the winter, and not much in the summer, so it's in a good location, and I've decided to repurpose it as a greenhouse.

Regular greenhouse frames are simple structures. The most common use a bow and post system. There is hardware made for connecting the bows, posts, purlins and struts as well as attaching the greenhouse film. But when you start working with other types of frames, a bit of ingenuity is required as every structure will have its own challenges to overcome.

This may look like a complicated build, but really, as you read through the article, I think that you'll find that it's a pretty simple and straight forward project requiring only basic building skills. If you can pound nails, tie a knot, and operate a couple of basic power tools, you can build something like this. It's just a matter of knowing what you want and being able to think outside the box a bit. Being able to read a tape measure comes in handy too. ;-)

Dog kennel greenhouse under construction.

This kennel was given to me years ago and is actually built from the parts from two different kennels. It has two doors and isn't square. It's approximately the same square footage as The Cube (90 square feet, give or take), but not being square, installing a center ridge will be interesting. I'm also going to be building it from as many existing materials as possible. I'll be using Schedule 40 PVC for the bows that will support the top, and nailer boards around the top of the walls to hold the greenhouse film that will cover the structure. I'll also be using suspended shelving instead of benches. The Cube uses benches, which makes it easy for rodents to get to the trays holding the seedlings, a problem that I've been fighting ever since I set up The Cube. Mice find germinating seed and seedlings irresistible, and there are fewer things more frustrating than finding hundreds of seed shells sitting on top of the potting soil, laying open like books after some little varmints have dug them up and eaten the meat of the seed during the night....

The first part of the build is the ridge rail. For this I used some scrap lumber and an old 2" X 8" X 10' plank. The lumber is old, but it'll work for this build. I'll probably remodel the kennel over the winter or next year, as I see things I'd like to improve, so I don't need the lumber to last for more than a year. Because no two sides of the kennel are parallel and because only two sides are the same length, the ridge rail is lashed to one side of its post on one end and the other side of its post on the other end. It looks funky, but it works and is pretty secure.

I like to use a ridge rail for a couple of reasons. First, it helps to support the roof. In this case, I'm using PVC pipe for the bows, and given that the roof will span 9' - 10', I need the extra support. Second, a ridge rail gives me a place to hang lights and/or a coiled water hose. The Cube has a ridge rail made from a steel I-beam. There is a trolley that runs on the beam and that I've hung a coiled hose from. I can't tell you how convenient it is to have the hose up instead of laying on the ground. It's up and out of the way when I'm not using it, so it doesn't get tangled, I don't have to worry about tripping over it when I'm moving things in or out of the greenhouse, and when I am using it, all I have to do is pull it out. This greenhouse won't have a trolley, but it's small enough that I can hang the hose from the center of the rail and use it the same way. If this greenhouse was long, I'd be setting up a trolley or set of rollers on the ridge rail similar to what The Cube has.

Lashing. It's important to lash the ridge rail to the upright both at the top and the bottom, I used two pieces of poly twine for the lashing. The kennel is just a little wider than the ridge rail is long, so I had to scab on some pieces of 2 X 4.

Instead of nailing or screwing the ridge rail to the end braces, I'm lashing them with baling twine. I have livestock and so I buy hay. I always save my baling twine and I won't buy hay baled with sisal or jute twine because they're difficult to work with. Poly twine is smooth and easy to reuse. I use poly twine for all sorts of things. Lashing, netting, braided rope, even lashed hinges can be made out of the stuff. It'll only last for a couple of years out in the elements (it's not UV stable), but for temporary things it can't be beat. And it's recyclable. Poly twine is recycled into more poly twine. I'm particular in how I cut the twine on a bale of hay or straw. I always try to cut it at the knot and hang it up when I remove it from the bale. When I remove what ever I've secured with the twine, all I need to do is untie the knot and undo the lashing, or I can use a knife or scissors and put the twine in the recycling bag if I don't plan on reusing it.

Supporting the "other" end of the rail.

When working on projects like this, it's easier if there are two people, especially when handling something like the ridge rail. But if you're doing it by yourself, you can make yourself an extra hand to support one end of the board while you're working on the other end. I screwed this piece of scrap to the upright to support the end of the rail and loosely tied it to the upright to keep it from sliding off, but not so tight that I couldn't move the rail back and forth to position it.

While I have a good set of tools, this building project is pretty simple and doesn't require a long list of tools or extensive construction experience. With some ingenuity and basic building skills, you can repurpose an existing structure as a small greenhouse. It's also not a terribly expensive project. I'm using scrap lumber, pallets I got for free, and greenhouse film I already have on hand to build the project, so it won't cost me much. But even if you did have to buy new lumber and film, it still wouldn't cost you as much as buying a regular greenhouse kit, and it can make your garden incredibly productive. I figured that when I built The Cube, I was into that project for less than $150. I have a couple of auto canopies that I will be converting to greenhouses this year and if I had to buy the frames, lumber and film new I would be into them for less than $350 each, which would be pretty reasonable for a 10' X 20' greenhouse. I'll include a list of materials and the tools I'm using to build this greenhouse at the end of the series.

To be continued in Part II framing in the roof.

This is a 4 part series on the conversion of a dog kennel into a greenhouse. When the project is finished and all of the articles are written, I'll post links to all of them here. Articles scheduled for this series:
Part I: Introduction and the ridge rail
Part II: Framing the roof
Part III: Hanging the shelves
Part IV: Installing the greenhouse film and conclusion


All content including pictures © Joanne Rigutto unless otherwise noted.

Saturday, January 16, 2016

Low Tunnels, Winter Planting, and Season Extension


Red Oak Leaf lettuce, January 2011


To many people, winter is a time of rest for the garden. The days are short, the soil is cool (or frozen), and there's a lot or rain falling or snow on the ground.

But to me, winter is the time of beginnings because my New Year's Eve is the winter solstice.

I live in the northern Oregon Willamette valley, and our winters here are pretty mild. Only short periods of freezing weather, and usually a fair amount of rain. On the shortest day, we get about 8 hours of sunlight. Not enough to keep things growing like they do in July, but it's enough to keep plants in maintenance mode or, on sunny days, even slowly growing. In my opinion, the biggest challenge I have in my gardens during the winter are cool soil and waterlogged soil.

Back in 2010, I started looking at ways to grow produce in my gardens during the winter. The problems that needed to be dealt with and mitigated were cool soils and too much water in the soils. I already knew that these issues could be solved by using greenhouses but I didn't have those, nor did I have the money to buy one.

So, the alternative was to look at something smaller. My research lead me to low tunnels, which are truly amazing devices. They are inexpensive, portable, easy to configure in any way that works for a particular garden bed. They can be used on the flat or over raised beds. Easy and fast to set up, and take down as well. In cold weather they can be covered with greenhouse film. In warm weather they can be covered with floating row cover fabric or shade cloth, depending on what you're growing and the time of year. They can be used to get a jump start on spring, and extend the season on the back end of the year.

Celery, planted in late January 2011. The kneeling boards down the center of the tunnel mean that the tunnel doesn't have to be opened other than the ends to allow entry and exit.


But care needs to be taken, as a low tunnel with greenhouse film on a sunny and warm day can also turn into an oven. I found that out when I first started working with low tunnels. I had 120  72-count nursery trays (aka plug trays) in a tunnel one day. The little seedlings had only been up for a few days and were looking good. One day it got up to the low to mid 60s, but I didn't think anything of it because it was cloudy. Then the sun came out. Working in the gardens, I enjoyed the sunshine for a couple of hours. And then I went to check on the seedlings.... The tunnel had been sealed, and when the clouds parted and the sun started shining that tunnel turned into an oven. It was probably between 90° and 100° in that tunnel. If the plants in the tunnel had been larger they probably would have survived. But still being in the cotyledon stage, they fried. I lost 8,642 plugs of seedlings in just 2 hours on that day.

Lesson learned. Now, if it's going to be over 55°, especially if there's a chance of the sun coming out, the least I do it to open the ends of the tunnels. But usually, if the highs are going to be in the mid 50s, the danger of freezing temperatures is probably over, so the greenhouse film may not even be necessary and the tunnels will have floating row cover fabric over them. If, for some reason, they do still have  greenhouse film, I'll open the ends and roll up the sides during the day.

There are many ways to build low tunnels. My preferred style is bows made from 10' sticks of 3/4" schedule 40 PVC pipe over 5' wide beds. It's best to use schedule 40 PVC because it's more resistant to UV radiation and temperature fluctuations. A tunnel built with 10' sticks over a 5' wide bed will be approximately 40" tall, which gives the average person enough room to work in a closed tunnel when crawling down the center, and if working from the sides with the walls rolled up, the gardener only has to reach 30" (or less if you leave a center path.

Low tunnel set up for peas in February. The sides are anchored by blocks made of left over mortar (I'm a retired tile and stone installer).

I cover the tunnels with 12' wide greenhouse film or 12' wide floating row cover, which leaves one foot on either side for weights to anchor. Sand bags, rocks, soil, boards or other weights can be used to anchor the sides of a tunnel. Sand bags (or bags filled with soil) are the best weights to use as they are easy to move and won't damage film or fabric that flaps against them.

66" wide tunnel (that used to be my default width of beds). This tunnel's film is held down by boards. The ends of the tunnel are kept closed with pinch clamps that anchor the film to the end T-posts.


To anchor the bows of the tunnel, I use ground pins, a top rail, and T-posts. The ground pins are made from 4' round fiberglass rods normally used for moveable electric fencing. The rods can be cut with a side grinder using either a carborundum or diamond blade and the blade is used to shape the blunt end into a point, which makes driving it into the ground easier. Each rod is cut in half, making 2 2' ground pins. When driven into the ground to a depth of 12", they are sufficient to keep the bows in place. The ground pins are placed on either side of the bed at 5' intervals, and the pipe slid over them.

T-posts are driven into the ground at each end of the bed and the end bows are tied to them. A top rail of the same pipe that the bows are made of, is run down the center of the bows after they are installed, and anchored to the T-posts with string and the tops of the bows with duct tape. This makes a surprisingly sturdy frame to hold the film or fabric. I also like to lay plastic construction netting over the ridge pole and bows. This adds extra support to the film or fabric and helps to keep them from sagging when it's raining.

Low tunnel with netting on the sides and ends to keep chickens out of the tunnel when the film sides are raised.


All content and images, unless otherwise noted © Joanne Rigutto